Sony DCR-IP220E Camcorder User Manual


 
235
Customising Your Camcorder Выполнение индивидуальных установок на Вашей видеокамере
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
REC LAMP
Meaning
When you press DATA CODE on the Remote
Commander, the date, time and various settings
are displayed during playback (p. 57).
The date and time are displayed during playback.
To set your area temporarily when using your
camcorder in a new location (p. 33)
To be used when your area is not in summer time
To be used when your area is in summer time
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel melody and the beep sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD
screen and viewfinder
To light up the camera recording lamp at the
front of your camcorder
To turn the camera recording lamp off so that the
subject is not aware of recording
POWER
switch
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
Mode
z DATE/CAM
DATE
——
z OFF
ON
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
Changing the menu settings
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of your camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
In more than five minutes after removing the power source
The PROGRAM AE, FLASH LVL, WHT BAL and COMMANDER items return to their default settings.
Other menu items are held in memory even when the battery is taken out.