Filter
Top Products
22
You can choose any of the following power sources for your camcorder: battery pack,
house current, and 12/24 V car battery. Choose the appropriate power source
depending on where you want to use your camcorder.
Place Power source Accessory to be used
Indoors House current Supplied AC power adaptor
Outdoors Battery pack Battery pack NP-F330 (supplied), NP-F550, NP-F530
In the car 12 V or 24 V car battery Sony DC adaptor/charger DC-V700
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply again
immediately.
Using the house current
To use the supplied AC power adaptor:
(1)Insert the connecting plate in the camcorder. Pull out the cover on the lid and pass
the connecting cord through the lid.
(2)Connect the connecting cord to the DC OUT jack on the AC power adaptor.
(3)Connect the power cord to the AC power adaptor.
(4)Connect the power cord to a wall outlet.
To remove the connecting plate
The connecting plate is removed in the same way as the battery pack.
WARNING
The power cord must only be changed at a qualified service shop.
PRECAUTION
The set is not disconnected from the AC power source (mains) as long as it is connected
to the power cord, even if the set itself has been turned off.
Using a car battery
Use a DC adaptor/charger such as Sony DC-V700 (not supplied). Connect the car
battery cord to the cigarette lighter socket of a car (12 V or 24 V). Connect the DC
adaptor/charger and the camcorder using the supplied DK-415 connecting cord.
This mark indicates that this product is a genuine accessory for Sony
video product.
When purchasing Sony video products, Sony recommends that you
purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.
1, 2 3 4
Advanced operations
Using alternative power sources