Filter
Top Products
46
To erase a character
In step 5 turn the control dial to select [ M ], then press the control dial. The last
character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If the mark appears in step 4
The cassette memory is full. If you erase the title in the cassette, you can label it.
If you have superimposed titles in the cassette
When the label is displayed, up to 4 titles also appear.
Note on “-----” indicator displayed on the LCD screen or in the viewfinder
The “-----” indicates the number of characters you can select for the label. When the “----
-” indicator has fewer than 10 spaces, the cassette memory is full.
Note on the cassettes
If you use a cassette tape set to prevent accidental erasure, you cannot label it. Slide the
protect tab so that the red portion is not visible.
Labeling a cassette