Filter
Top Products
26
Changing the mode settings
Items for VTR mode only
HiFi SOUND* <r STEREO/1/2>
• Select STEREO to play back stereo sound or main and sub sound (for dual sound).
• Select 1 to play back the left sound (for stereo sound) or main sound (for dual sound).
• Select 2 to play back the right sound (for stereo sound) or sub sound (for dual sound).
TITLE DSPL <r ON/OFF>
• Select ON to display the title you have superimposed.
• Select OFF not to display the title.
TAPE TITLE
Select this item to label the cassette tape.
AUDIO MIX*
Select this item and adjust the balance between the stereo 1 and stereo 2 by turning the
control dial.
CM SEARCH <r ON/OFF>
• Select ON to search using cassette memory.
• Select OFF to search without using cassette memory.
DATA CODE <DATE/CAM or r DATE>
• Select DATE/CAM to display date and recording data during playback.
• Select DATE to display date during playback.
* These settings return to the default 5 minutes or more after the power source is
disconnected or battery is removed. As far as the items without an asterisk are
concerned, their settings are retained even when the power source is disconnected or
battery is removed, as long as the vanadium-lithium battery is charged.
** P EFFECT setting returns to OFF when the power is turned off.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
Notes
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance
in AUDIO MIX.
• If you select 16BIT in AUDIO MODE menu, you cannot add an audio sound.
• If you select BRIGHT in LCD B.L. menu, the battery life while recording becomes 10
to 20% shorter. When you use the power sources except for a battery, the menu item
LCD B.L. is set to BRIGHT automatically and the item does not appear in the screen.