Filter
Top Products
78
Others
Symptom
While editing using the DV
connecting cable, recording picture
cannot be monitored.
The camcorder becomes warm.
The supplied Remote Commander
does not work.
No function works though the power
is on.
AC power adaptor
Symptom
The VTR/CAMERA or CHARGE
lamp does not light.
The CHARGE lamp flashes.
Cause and/or corrective actions
• Remove the DV connecting cable, and connect it again.
• If the power of the camcorder is on for a long time, it
becomes warm, which is not malfunction.
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 87)
• The batteries are dead.
m Insert new ones. (p. 87)
• Disconnect the connection plug on the battery pack or on
the AC power adaptor, then reconnect it in about 1 minute.
Turn the power on. If the functions still do not work, press
the RESET button using a sharp-pointed object. (If you
press the RESET button, all the settings including the date
and time return to the default.)
(p. 82)
Corrective actions
• Disconnect the power cord. After about 1 minute, reconnect
the power cord. (p. 7)
• See the chart on the next page.
Trouble check