Filter
Top Products
86
Identifying the parts
#§
#∞
#¶
#•
#¢
To watch the demonstration
You can watch a brief demonstration of pictures with special effects. If the
demonstration appears when you turn on the camcorder for the first time, exit the demo
mode to use your camcorder.
To enter demo mode
(1)Eject the cassette and set the POWER switch to VTR.
(2)While holding down (, set the POWER switch to CAMERA. The demonstration
starts. The demonstration stops when you insert the cassette.
Note that once you enter demo mode, this mode is retained as long as the vanadium
rechargeable battery is in place. Therefore, demonstration starts automatically 10
minutes later every time you set the POWER switch to CAMERA, and after you eject
the cassette.
To exit demo mode
(1)Set the POWER switch to VTR.
(2)While holding down p, set the POWER switch to CAMERA.
#¢ LASER LINK button (p. 49)
#∞ Laser Link emitter (p. 49)
#§ Microphone
#¶ Speaker
#• Remote sensor (p. 87)