Filter
Top Products
21
Control
DFW-SX910/X710
Memory Channel
Operation
Save
Selecting the Memory Channel used to
save the data
Address Data Operation
F0F00620h 10000000h Selects Ch 1.
20000000h Selects Ch 2.
Saving data
Address Data Operation
F0F00618h 80000000h Saves the current setting.
Load
Address Data Operation
F0F00624h 00000000h Loads the default settings.
10000000h Loads the setting information in Ch 1.
20000000h Loads the setting information in Ch 2.
The settings of the camera features and the video mode
can be stored.
The camera memorizes the channel most recently used
to read out the setting information using nonvolatile
memory. Then, the information in that channel will be
loaded when the power is turned on the next time.
The video mode settings are loaded only when the
power is turned on. If you read out Memory Channels
during operation, only the settings of the camera
features are loaded.
The value of Pan/Tilt depends on the video mode
settings. If you change the video mode after carrying
out the Save command, the value of Pan/Tilt may not
be loaded correctly.