Filter
Top Products
22
Control
DFW-SX910/X710
Feature Controls (Complies with the IIDC
Standard)
This camera supports the following features.
Brightness Makes fine adjustment of the black level possible.
Auto Exposure Controls the target video level value when Shutter/Gain is set to Auto.
Sharpness Adjusts the picture sharpness.
White Balance Adjusts the color balance of the camera to ensure that a white subject appears white in the video image.
Hue Adjusts color tones.
Saturation Adjusts color intensity.
Gamma Sets a gamma curve.
Shutter Controls the exposure time. To control this feature, you can use both relative control values from 1/100,000 of a second to 16
seconds, allocated from 3 to 1150, and absolute value control, with values from 1/100,000 of a second to 17.5 seconds, set
continuously.
Gain Controls the gain in the range from 0 dB to 18 dB. The unit of the adjustment is approximately 0.035 dB.
Trigger Controls external triggers. This feature supports Trigger Mode 0 and 1. A software trigger feature is also supported.
Pan/Tilt Sets CCD output range (both horizontal (Pan) and vertical (Tilt)). The video mode predetermines the variable range. Not
available in Partial Scan mode (Format7/Mode0).
Optical Filter Sets a preset value for White Balance. Setting values of 3200 K and 5600 K are available.