Filter
Top Products
25
Control
DFW-SX910/X710
Actual control can be carried out by setting registers
from F0F00800 onward.
ddd indicates the control value expressed as a 12 bit
hexadecimal number.
xxx indicates that any setting made will be ignored.
Brightness control
Address Data
F0F00800 82000ddd Adjusts the black level.
AE reference control
Address Data
F0F00804 82000ddd Sets the AE reference value.
Sharpness control
Address Data
F0F00808 82000ddd Adjusts the picture sharpness.
0 (Soft)y7 (Sharp)
White Balance control
Address Data
F0F0080C 82uuuvvv Adjusts White Balance using relative
values.
uuu: Blue component
vvv: Red component
83xxxxxx Sets Auto White Balance.
86xxxxxx Adjusts White Balance automatically
once, then the feature turns to manual
mode.
Hue control
Address Data
F0F00810 82000ddd Adjusts color tones.
Saturation control
Address Data
F0F00814 82000ddd Adjusts color intensity.
Gamma control
Address Data
F0F00818 82000ddd Sets the gamma compensation.
82000080: Deactivates the gamma
feature.
82000081: Activates the gamma
feature (gamma curve 1).
82000082: Activates the gamma
feature (gamma curve 2).
Shutter (exposure time) control
Address Data
F0F0081C 82000ddd Controls shutter using the manually
set relative value.
83000xxx Sets Shutter to AUTO.
C2000xxx Controls shutter using the absolute
control value.
F0F00970 After F0F0081C has been set to
Absolute value control, set exposure
time using this register.
Gain control
Address Data
F0F00820 82000ddd Sets Gain manually.
83000xxx Sets Gain to AUTO.
Trigger control
Address Data
F0F00830 82000000 Sets Hardware Trigger Mode0.
82010000 Sets Hardware Trigger Mode1.
82E00000 Sets Software Trigger Mode0. *
82E10000 Sets Software Trigger Mode1. *
F0F0062C* 80000000 Outputs a software trigger.
In Trigger Mode0, automatically reset
to 0 when exposure ends.
00000000 In Trigger Mode1, ends exposure if
“0” is set.
* These features comply with IIDC v1.31.
Pan/Tilt control
Address Data
F0F00884 82000ddd Sets Pan manually.
F0F00888 82000ddd Sets Tilt manually.
Optical Filter control
Address Data
F0F0088C 82000ddd Sets preset value for White Balance.
82000000: value for 3200 K
82000001: value for 5600 K
Indicates an
arbitrary value
using a 32-bit
floating point
number.
(See page 26.)