164
Warning messages
If the following messages appear,
follow the instructions.
For “InfoLITHIUM” battery only
• An incompatible battery pack is
being used.
Set date and time?
• Set the date and time. If you
have not used the camera for a
long time, charge the internal
rechargeable battery (pages 27,
167).
Power insufficient
• You tried to perform [Cleaning
mode] when the battery level is
insufficient. Charge the battery
pack or use the AC Adaptor/
charger (sold separately).
No Memory Stick
No CF card
• The type of the memory card
inserted into the camera is
different from the memory card
type selected with [Memory
card] in the Setup menu. Set
it to appropriate position.
Unable to use Memory Stick.
Format?
Unable to use CF card. Format?
•
The memory card was formatted
on a computer and the file format
was modified, or the memory card
was formatted on another device.
Select [OK], then format the
memory card. You can use the
memory card again, however, all
previous data in the memory card
is erased. It may take a some time
to complete the format.
If the message still appears,
change the memory card.
Card error
• An incompatible memory card is
inserted or the format was failed.
Read only memory
• Your camera cannot record or
delete images on these “Memory
Stick Duo” media.
Reinsert the Memory Stick.
Reinsert the CF card.
• The inserted memory card
cannot be used in your camera.
• The memory card is damaged.
• The terminal section of the
memory card is dirty.
Processing... Unable to operate.
• When the buffer memory is full,
you attempt to operate the
Intelligent preview function by
releasing the preview button.
Invalid operation
• When in BULB shooting, you
attempt to operate the Intelligent
preview function.