Filter
Top Products
141
“Memory Stick
” Operations
Copying still images from a tape – Photo save
To cancel copying
Push the CUSTOM PRESET/MENU switch in the MENU direction and release it again.
When the memory of the “Memory Stick” is full
“MEMORY FULL” appears on the LCD screen or in the viewfinder, and the copying
stops. Insert another “Memory Stick” and repeat the procedure from step 2.
Note
You can copy only still images to a “Memory Stick” and cannot change the order of still
images copied.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Also, do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may
occur.
To record all the images recorded on the tape
Rewind the tape all the way back and start copying.
If the write-protect tab on the “Memory Stick” is set to LOCK
“NOT READY” appears when you select the item in the menu settings.
When you change the “Memory Stick” in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick.”
When the auto logo insert function is activated
You cannot use the photo save function. Refer to the extra operating instructions, “Auto
Logo Insert for Copyright Protection.”