Filter
Top Products
98
Recording video or TV programs
Using a DV connecting cable (i.LINK cable)
Simply connect the DV connecting cable (i.LINK cable) (not supplied) to DV IN/OUT
and to DV IN/OUT of the DVCAM/DV products. With a digital-to-digital connection,
video and audio signals are transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into the VCR.
(2) Set the MEMORY/CAMERA/VTR selector to VTR.
(3) Set DISPLAY in
to LCD in the menu settings (p. 120).
(4) Push the CUSTOM PRESET/MENU switch in the MENU direction and release
it to erase the menu display.
(5) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(6) Press N on the VCR to start playback. The picture to be recorded appears on
the LCD screen or in the viewfinder.
(7) Press X on your camcorder at the scene from which you want to start
recording.
When you have finished recording
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 5, press z REC and MARK simultaneously, then immediately press X. And in
step 7, press X at the scene from which you want to start recording.
S VIDEO LANC
DV
5
REC
PAUSE
: Signal flow
(not supplied)
DV IN/OUT
DV IN/OUT