Filter
Top Products
134
Menu List
Appendixes
Menu List
This section briefly explains menus that the camcorder
provides for adjustments and settings using tables.
For the menu organization and the USER menu, see
Chapter 5.
OPERATION Menu
The following table lists and describes the items in the
OPERATION menu. Some pages of the OPERATION
menu have been registered in the USER menu at the
factory. These pages are indicated by a circle (
a) in the
USER menu column. The USER MENU CUSTOMIZE
menu allows you to add and delete pages in the USER
menu to suit your requirements.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
USER
menu
No. Page Item Settings Default Description
a 01 OUTPUT REAR BNC OUT SEL VBS/SDI VBS See “5-3-2 Selecting the
Output Signals” on page 88.
a 02 TEST OUT TEST OUT MARKER OFF/ON OFF Selects whether or not the
marker signal is mixed to the
output signal from the TEST
OUT connector.
TEST OUT VFDISP OFF/ON OFF Selects whether or not the VF
DISP display signal is mixed
to the output signal from the
TEST OUT connector.
TEST OUT MENU OFF/ON OFF Selects whether or not the
MENU display signal is mixed
to the output signal from the
TEST OUT connector.
TEST OUT ZEBRA OFF/ON OFF Selects whether or not the
ZEBRA display signal is
mixed to the output signal
from the TEST OUT
connector.
TEST OUT TC OFF/ON OFF Selects whether or not a time
code signal is mixed to the
output signal from the TEST
OUT connector.
TEST OUT SELECT ENC/R/G/B ENC Selects the output signal of
TEST OUT.