Filter
Top Products
14
Example of System Configuration
Chapter 1 Overview
1-2 Example of System Configuration
The diagram below shows a typical configuration of the
camcorder for ENG and EFP.
For more information about the fittings, connections, or
use of additional equipment and accessories, see “Chapter
7 Setting Up the Camcorder” as well as the operation
manuals for the connected equipment.
Control signals
RM-B150/B750 Remote Control Unit
“Memory Stick” (see page 156)
Video output
Video monitor for color image check during
shooting
Extension board
1) For the DVW-970 only
Product Model name
Pull Down (24P) Board CBK-FC01
1)
SDI Output Board CBK-SD01
Picture Cache Board CBK-MB01
Viewfinder-related equipment
Name / Purpose Magnification Part No.
Fog-proof filter — 1-547-341-11
Lens assembly –2.8 D to +2.0 D A-8262-537-A
Lens assembly –3.6 D to –0.8 D A-8262-538-A
Lens assembly –3.6 D to +0.4 D A-8267-737-A
Lens assembly
(3 × magnification)
–2.4 D to +0.5 D A-8314-798-A
BKW-401 Viewfinder Rotation Bracket
AC power supply
Battery
Product Model name
AC Adaptor AC-550/550CE
AC Adaptor AC-DN10
Product Model name
Battery Charger BC-M150/M50
Battery Pack BP-GL65/GL95/L60S
Audio input signals
External microphone ECM-672 or similar microphone
CAC-12 Microphone Holder
Analog audio equipment
CCXA-53 audio cable
WRR-860/862 UHF Portable Tuner
WRR-855-series UHF Synthesized Tuner Unit
Audio output
XLR 5-pin connector for stereo microphone
(service part)
Wireless video/audio transmission
Wireless Camera
Transmitter
WLL-CA50