Filter
Top Products
14
Basic Functions
Mode Condition
Basic settings
Mode Power On
Power Off
1)
IFC
2)
Initializing
3)
During displaying
Other Status
Memory Command
Command the menu
Address Set aaaaaa
IF_Clear aaaaaa
CAM_Power On a ××aa×
CAM_Power Off a ××aa×
IR_Receive On/Off ×××a
4)
a ×
IR_ReceiveReturn On/Off ×××aa×
CAM Version Inq aaaaaa
CAM_Power Inq. aaaaaa
BlockInquiry ×××aa×
InquiryCommand (and similar commands) ×××aa×
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently fi
nishes the pan/tilt reset operation
and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent,
until Completion is returned.
4) The camera does not receive the operation sent from the Remote Commander.