Filter
Top Products
37
Command List
Pan/Tilt Position (for reference)
LED Status
Parameter (position)
PAN FA60 (–100 degree) to 05A0 (+100 degree)
TILT FE98 (–25 degree) to 0168 (+25 degree)
Pan/Tilt Status Code List
PQRS
- - - - - - - - 0 - - - - - - 1 A Pan movement all the way to the left
- - - - - - - - 0 - - - - - 1 - A Pan movement all the way to the right
- - - - - - - - 0 - - - - 1 - - A Tilt movement all the way up
- - - - - - - - 0 - - - 1 - - - A Tilt movement all the way down
- - - - - - - - - - 0 0 - - - - Pan movement is correct
- - - - - - - - - - 0 1 - - - - Pan position cannot be detected
- - - - - - - - - - 1 0 - - - - The Pan mechanism is abnormal
- - - - - - 0 0 0 - - - - - - - The Tilt movement is correct
- - - - - - 0 1 0 - - - - - - - The Tilt position cannot be detected
- - - - - - 1 0 0 - - - - - - - The Tilt mechanism is abnormal
- - - - 0 0 - - 0 - - - - - - - No movement instructions
- - - - 0 1 - - 0 - - - - - - - In the midst of a Pan/Tilt
- - - - 1 0 - - 0 - - - - - - - Pan/Tilt completed
- - - - 1 1 - - 0 - - - - - - - Pan/Tilt failed
- - 0 0 - - - - 0 - - - - - - - Not initialized
- - 0 1 - - - - 0 - - - - - - - Initializing
- -1 0 - - - - 0 - - - - - - - Initialization completed
- -1 1 - - - - 0 - - - - - - - Initialization failed
( - : optional)
Status POWER (Green) STANDBY (Orange)
Main power ON Power On (including initializing period) On Off
When receiving infrared signals form Remote Commander Blinking Off
At position detection error On Blinking
Sandby status Off On
Power off by VISCA or the Remote Commander
Main power Off Off Off
Initialization Pan/tilt error Blinking Blinking
error Internal error(LSI, etc.) Blinking alternately
BOTTOM switch Setting error (Example: when the SYSTEM SELECT switch On On
and SYSTEM is set to 7 or F.)
SELECT switch