Filter
Top Products
17
Basic Functions
Effect
Mode Power On
Power Off
1)
IFC
2)
Initializing
3)
Slow Shutter
Picture Effect ON
During displaying
Memory Recall
Command Status the menu
CAM_Aperture Reset/Up/Down/Direct ×××aa×
4)
×
CAM_PictureEffect Off/Nega/B&W ×××aa×
4)
×
Display info. (ON/OFF) ×××aa×
4)
×
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently fi
nishes the pan/tilt reset operation and stops at the Home
position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is
returned.
4) The camera is not limited in operation due to the menus. But the camera follows the operational restrictions of the current m
ode during IFC executing/initializing/slow shutter mode/Effect
On.