Filter
Top Products
18
Basic Functions
Pan/Tilt
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently fi
nishes the pan/tilt reset operation and stops at the Home position, until the
video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.
4) The pan/tilt operation works by Pan-tiltDrive Up/Down/Left/Right/UpLeft/UpRight/DownLeft/DownRight commands.
5) The camera follows the operational restrictions of the mode in effect during zoom/focus or pan/tilt operations.
6) a: while the camera operates in Tele/Wide zoom mode.
7) a: while the camera operates in Far/Near focus mode.
Common Common
VISCA RC VISCA VISCA VISCA RC VISCA RC VISCA RC
Pan-tiltDrive Up/Down/Left/ VISCA
×××
a aaa
×××××××× ×
a
Right/UpLeft/UpRight/
DownLeft/DownRight RC
×××
aa
×××××××××× ×
a
Pan-tiltDrive Stop VISCA
×××
aaa
× ×××××××× ×
a
Pan-tiltDrive AbsolutePosition VISCA
×××
a aaaa
××××××× ×
5)
×
Pan-tiltDrive RelativePosition VISCA
×××
aa
×××××××××× ×
5)
a
Pan-tiltDrive Home
VISCA
×××
aa
××××
a
××××× × ×
RC
×××
aa
×××××
a
×××× × ×
Pan-tiltDrive Reset
VISCA
×××
aa
×××××××××× ×
5)
a
RC
×××
aa
×××××××××× ×
5)
a
Pan-tiltLimitSet LimitSet VISCA
×××
aa
×××××××××× ×
5)
×
Pan-tiltLimitSet LimitClear VISCA
×××
aa
×××××××××× ×
5)
×
Memory Set
Common
××××××××××××××× ×
5)
×
Memory Reset
Common
××××××××××××××× ×
5)
×
Memory Recall
VISCA
××××
6)
×
7)
aa
××××××
aa
×
5)
×
RC
××××
6)
×
7)
a
× ××××××
aa
×
5)
×
Mode
Power
Off
1)
IFC
2)
Transmit
device
Initia-
lizing
3)
Zoom
(Direct)
Focus
(Direct)
Pan/Tilt normal status
Home
execution
Memory Recall
Position
detection error
Pan/tilt
movement
according to the
command
Absolute
Position
execution
Relative
Position
execution
Reset
execution
During
displaying the
menu
Command
Power On