Filter
Top Products
52
US
2
Select the point where you want
to divide the movie into scenes
using
/ , and then select
.
Notes
A slight difference may occur from the point
where you select and the actual dividing point,
as your camcorder selects the dividing point
based on about half-second increments.
Some basic editing operations can be
done on the camcorder. If you want to do
advanced editing operations, use the built-in
“PlayMemories Home” software.
Capturing a photo from a movie
1
Select [Photo Capture] that
appears on the playback screen
of a movie.
2
Select the point where you want
to capture a photo using
/ ,
and then select
.
If the movie was recorded with one of
the following image quality levels, the
image size will be set as shown below.
High definition image quality (HD): 2.1
M (16:9)
Wide aspect ratio (16:9) with standard
definition image quality (STD): 0.2 M
(16:9)
4:3 aspect ratio with standard definition
image quality (STD): 0.3 M (4:3)
On recording date and time of
captured photos
The recording date and time of captured photos
are the same as the recording date and time of
the movies.
If the movie you are capturing from has no data
code, the recording date and time of the photo
will be the date and time you captured from
the movie.
A B
A: Returns to the beginning of the selected
movie
B: Adjusts the capturing point with more
precision
A: Returns to the beginning of the selected
movie
B: Adjusts the dividing point with more
precision
A B