Filter
Top Products
14
E:\SONY\2661356111\01GB03GET_E.fm
HDR-HC3E
2-661-356-11(1)
DV format pictures
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The CHG (charge) lamp flashes during
charging, or Battery Info (p. 30) will not be
correctly displayed under the following
conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery
Info only).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
mains lead is disconnected from the wall socket.
• When attaching an optional video light, it is
recommended that you use a NP-FP60, NP-
FP70, NP-FP71 or NP-FP90 battery pack.
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
(77 °F) (10 to 30 °C (50 °F to 86 °F) is
recommended).
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
On the AC Adaptor
• Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
PRECAUTION
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FP50 85 90
NP-FP60
(supplied)
130 140
NP-FP70 180 190
NP-FP71 215 230
NP-FP90 320 345
Step2: Charging the battery pack (Continued)