Filter
Top Products
88
HDR-HC3E
2-661-356-11(1)
E:\SONY\2661356111\01GB09TBS_E.fm
Troubleshooting
Troubleshooting
If you run into any problems using your camcorder, use the following table to troubleshoot the
problem. If the problem persists, disconnect the power source and contact your Sony dealer.
The power does not turn on.
• Attach a charged battery pack to the camcorder (p. 11).
• Use the AC Adaptor to connect to a wall socket (p. 11).
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor from the wall socket or remove the battery pack, then reconnect
it after about 1 minute.
• Press the RESET button (p. 31) using a sharp-pointed object (If you press the RESET button,
all settings are reset, except Personal Menu items).
Buttons do not work.
• During Easy Handycam operation, not all buttons are functional (p. 24).
You cannot turn Easy Handycam operation on or off.
• During recording or communicating with another device via USB cable, you cannot turn
Easy Handycam operation on or off.
Settings change during Easy Handycam operation.
• During Easy Handycam operation, the settings of the functions that are not displayed on the
screen return to their defaults (p. 22, 46).
[DEMO MODE] does not start.
• Eject the cassette and “Memory Stick Duo” from your camcorder (p. 20, 21).
The camcorder gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The power abruptly turns off.
• When approximately 5 minutes have elapsed while you do not operate your camcorder, the
camcorder is automatically turned off (A.SHUT OFF). Change the setting of [A.SHUT OFF]
(p. 66), or turn on the power again (p. 15), or use the AC Adaptor.
• Charge the battery pack (p. 11).
Overall operations/Easy Handycam
Batteries/Power sources