Filter
Top Products
44
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use the 21-pin adaptor supplied with your camcorder (For models with the mark printed
on their bottom surfaces only). This adaptor is designed for output use only.
b Notes
• When the A/V connecting cable is used to output images, images are output with SD (standard definition)
image quality.
z Tips
• If you connect your camcorder to your TV using more than one type of cable to output images, the order
of priority of the output signal is as follows:
HDMI t component video t S VIDEO t audio/video.
• HDMI (High Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio. You can switch to the appropriate image
quality automatically if you connect to a Sony TV with Video-A mode. Refer to the instruction manual of
your TV for details.