Filter
Top Products
43
Table of Contents Enjoy Useful Functions Index
GB
Press MANUAL to make the
camcorder adjust the depth of
the 3D image.
Pressing MANUAL repeatedly toggles
between enabling and disabling the
3D depth adjustment.
Rotate the MANUAL dial to adjust
the 3D depth while checking the
image on the LCD screen.
Items you can control with the
MANUAL dial
3D recording
[3D Depth Adjustment]
[Focus] ... p. 71
[Exp
osure] ... p. 71
2D recording
[Focus] ... p. 71
[Exposure] ... p. 71
[IRIS] ... p.
72
[Sh
utter Speed] ... p. 72
[AE Shif
t] ... p. 72
[Whi
te Balance Shift] ... p. 72
To assign the menu item to the
MANUAL dial
Press and hold MANUAL down for a
few seconds.
The [Dial Setting] screen appears.
Rotate the MANUAL dial and select the
item to be assigned.
P
ress MANUAL.
Notes
Manual settings will be retained even if you
change the assigned item of the MANUAL dial.
However, if you set [Exposure] after setting
[AE Shift] manually, [Exposure] will override
[AE Shift].
If you set either one of [Exposure], [IRIS], or
[Shutter Speed], the settings of other 2 items
are canceled.
If you select [RESET] in step , all the items
adjusted manually are reset to the default
settings.
Tips
In the case of items other than [3D Depth
Adjustment], pressing MANUAL switches
between automatic and manual settings.
You can also assign menu items to the
MANUAL dial by touching
(MENU)
[Camera/Mic] [
( Camera Settings)]
[Dial Setting].
Even if you open the IRIS wider (a smaller
F-stop) than F3.4 when you set the zoom lever
to the W (Wide angle) side, the IRIS is reset
to F3.4 as you move the zoom lever to the T
(Telephoto) side.
If you adjust the IRIS, the in-focus range in
front of and behind the focused subject is
changed. When you open the IRIS wider (a
smaller F-stop), the in-focus range becomes
narrower, and when you close the IRIS
narrower (a larger F-stop), the in-focus range
becomes wider. You can set the IRIS to a
preferred value depending on the shooting
scenes.
When you record images under a fluorescent
lamp, sodium lamp, or mercury lamp,
horizontal stripes may appear, flicker may
occur, or color may change. In this case, change
the shutter speed according to the power supply
frequency in your region.