Filter
Top Products
Appendixes
180
Menu List
Menu List
This section briefly explains menus that the camcorder
provides for adjustments and settings using tables.
For the menu organization and the USER menu, see
Chapter 6.
This manual also explains some adjustments and settings
to be made using the OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu and DIAGNOSIS
menu.
For details of these menus, refer to the Maintenance
Manual.
OPERATION Menu List
The following table lists and describes the items in the
OPERATION menu. Some pages of the OPERATION
menu have been registered in the USER menu at the
factory. These pages are indicated by a circle (
a) in the
USER menu column. The USER MENU CUSTOMIZE
menu allows you to add and delete pages in the USER
menu to suit your requirements.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
USER
menu
No. Page Item Settings Default Description
a 01 OUTPUT LCD BRIGHT <L> (–32 to +31) 0 See 7-3-2 “Selecting the
Output Signals” on page 131.
LCD BRIGHT <H> (–32 to +31) 0
LCD COLOR (–32 to +31) 0
i.LINK MODE AV/C/FAM AV/C
PB WIDE ID (IMX)
1)
(PDW-530/530P only)
THROU/AUTO THROU When playing back a disc
recorded as MPEG IMX 50/
40/30 Mbps, specifies
whether to add wide picture
information recorded on the
disc to the output signal.
THROU: Output the video
signals of the disc being
played back without
adding wide picture
information.
AUTO: When wide picture
information is detected
on the disc being played
back, add wide picture
information to the output
video signals.
REAR BNC OUT SEL
(when option board is
connected)
VBS/SDI VBS See 7-3-2 “Selecting the
Output Signals” on page 131.
LIVE LOGGING
1)
OFF/ON OFF See 3-2-9 “Recording in Live
Logging Mode” on page 57.