Filter
Top Products
Chapter 3 Recording and Playback
66
3-3 Checking Recording and Playback
Locked clips cannot be deleted or renamed. Unlock the
clip if you want to perform any of these operations.
To unlock clips
Carry out step 2 of “Locking Clips” to select a locked clip
(one with the lock icon displayed on its thumbnail), then
carry out steps 3 and 4 of “Locking Clips”.
To lock or unlock clips without displaying the
THUMBNAIL menu
After carrying out step 2 in the procedure, press the STOP
button with the SHIFT button held down (shortcut
operation).
To lock all clips
1
Carry out steps 1 and 3 of “Locking Clips” to display
the THUMBNAIL menu.
2
Turn the SEL/SET dial or MENU knob to select
“LOCK ALL CLIPS”, and then press the dial or knob.
A confirmation screen appears.
To cancel the lock operation and return to the
thumbnail screen
Do one of the following.
• With “CANCEL” selected, press the SEL/SET dial
or the MENU knob.
• Press the RESET button.
3
Turn the SEL/SET dial or MENU knob to select
“OK”, and then press the dial or knob.
All clips are locked, and you return to the thumbnail
screen.
To unlock all clips
Carry out the procedure in “To lock all clips”, selecting
“UNLOCK ALL CLIPS” in step 2.
Deleting clips
Notes
• Clips cannot be deleted when the Write Inhibit tab of the
disc is in the recording disabled position.
• Locked clips cannot be deleted.
• If a clip which is referenced in a clip list is deleted, that
clip list is also deleted.
You can use the DISC menu to delete the last clip or all
clips. For details, see “To delete the last recorded clip”
(page 42).
1
With the sub clip indicator off, press the
THUMBNAIL button.
The thumbnail indicator lights, and the thumbnails of
the clips on the disc appear.
2
Turn the SEL/SET dial or MENU knob to select the
thumbnail to delete.
3
Holding down the SHIFT button, press the SUBCLIP
button.
The THUMBNAIL MENU appears (see step 3 of
“Locking Clips” (page 65)).
To escape from the THUMBNAIL menu to the
previous screen
Press the RESET button.
4
Turn the SEL/SET dial or MENU knob to select
“DELETE CLIP”, and then press the dial or knob.
Thumbnails of 4 frames in the target clip appear.
One of the following messages appears in a
confirmation dialog, depending on whether the target
clip is referenced in a clip list.
When the target clip is not referenced in a clip list:
“DELETE CLIP?”
When the target clip is referenced in a clip list:
“DELETE CLIP & CLIP LIST?” (The clip list
that references the clip will also be deleted.)
Lock icon