Filter
Top Products
Appendixes
201
Menu List
1) The setting of this item is overridden by the setting of BEFORE END 3
when TYPE DETECTION in the BATTERY 2 page is set to OTHER.
2) The setting of this item is overridden by the setting of END 3 when TYPE
DETECTION in the BATTERY 2 page is set to OTHER.
3) This is supported from firmware version 1.4.
4) When TYPE DETECTION in the BATTERY 2 page is set to AUTO, any
batteries other than Sony BP-series batteries and Anton Bauer intelligent
battery systems are classified as “Others”.
5) Flashes once per second when the battery status is “BEFORE END”, and
flashes 4 times per second when the battery status is “END”.
6) This is supported from firmware version 1.5
16 GENLOCK GENLOCK OFF/ON ON Turns genlock on and off.
RETURN VIDEO OFF/ON OFF Turns return video on and off.
GL H PHASE (–60 to +139)
(PDW-510/530)
0 Genlock H phase setting.
(–59 to +142)
(PDW-510P/530P)
0
GL SC PHASE (–99 to +99) 0 Genlock subcarrier phase setting
GL SC 0/180 SEL 0/180 180 Genlock subcarrier phase setting
17 ND COMP
(PDW-530/530P
only)
ND OFFSET
ADJUST
OFF/ON — Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
CLEAR ND
OFFSET
— EXEC Clears ND filter color compensation values.
18 AUTO SHADING AUTO BLK
SHADING
EXEC EXEC Execute the auto black shooting function.
RESET BLK SHD EXEC EXEC Clears black shooting compensation values.
TEST OUT SELECT ENC/R/G/B ENC Selects the signal output to the TEST OUT
connector.
MASTER GAIN
(TMP)
–3/0/3/6/9/12/18/
24/30/36/42/48 dB
0 dB Temporarily sets the master gain value.
19 DISC DELETE LAST CLIP EXEC EXEC Delete the last clip.
DELETE ALL CLIPS EXEC EXEC Delete all clips on the disc.
QUICK FORMAT EXEC EXEC Formats the disc. All the recorded data is
deleted.
20 NETWORK DHCP ENABL/DSABL DSABL Selects whether to enable automatic
acquisition of the IP address from a DHCP
server.
IP ADDRESS xxx.xxx.xxx.xxx 192.168.1
.10
Sets the IP address.
SUBNET MASK xxx.xxx.xxx.xxx 255.255.2
55.0
Sets the subnet mask.
DEF. GATEWAY xxx.xxx.xxx.xxx 0.0.0.0 Sets the default gateway.
LINK SPEED AUTO/10 Mbps/
100 Mbps
AUTO Sets the communications speed.
DUPLEX AUTO/FULL/HALF AUTO Sets the duplex mode.
No. Page Item Settings Default Description