Filter
Top Products
Adjusting the White Balance
41
Recording
To the B position of the WHITE BALANCE
switch, ATW mode is assigned at the factory. The
setting can be changed with “White Switch <B>”
(page 105) of the CAMERA SET menu to select
Memory B mode.
B: ATW or Memory B mode
A: Memory A mode
PRST: Preset mode
Assigning the ATW on/off function to an
assignable button permits you to independently
activate/deactivate ATW.
For details on the assignable buttons, see “Changing
Functions of the Assignable Buttons” on page 58.
When you press the DISPLAY/BATT INFO
button, the current adjustment mode and color
temperature are displayed on the screen.
ATW: ATW mode
W:A: Memory A mode
W:B: Memory B mode
W:P: Preset mode
Execute auto white-balance adjustment according
to the color temperature of the light source.
The adjustment value can be stored in memory A
or B.
Note
Auto white-balance adjustment cannot be
executed in Preset mode.
1 To store the adjustment value in
memory, select Memory A or Memory
B mode.
2 Select the appropriate ND filter
according to the lighting condition.
3 Place a white subject under the same
lighting condition and shoot it so that a
white area is obtained on the screen.
A white object (white cloth, a white wall,
etc.) near the subject may be used in place.
Be careful not to have any spots of high
illumination on the screen.
4 Adjust the lens iris opening.
Set it to the proper condition if the manual
iris adjustment mode is selected.
5 Press the AUTO WHT BAL button.
Auto white-balance adjustment begins.
During adjustment, an in-progress message is
displayed on the screen. When the adjustment is
completed successfully, the message changes to a
completion message, and the obtained color
temperature is displayed.
Executing Auto White Balance
L
M
H
B
A
PRST
AT W
GAIN
WHITE
BALANCE
WHITE BALANCE switch
TLCS
.
ATW 4300K
PPOFF
++
T1.6
1 1.5 2 3 4
ASSIGN 4
AUTO
WHT BAL
AUTO WHT BAL button