Filter
Top Products
Picture Profiles
68
Recording
1 Press the PICTURE PROFILE button.
The P.PROFILE menu is displayed.
2 Operating the jog dial, select “SEL”
from the P. PROFILE menu then select
the picture profile number (PP1 to
PP10) to operate.
3 Operating the jog dial, select “SET”
and make the settings of the picture
profile items.
For details on the setting items, see “Picture
Profile Items” on page 71.
4 When the settings are completed, press
the PICTURE PROFILE button to exit
the menu.
Selecting a Picture Profile using the
P.PROFILE menu
Once you store a picture profile, you can call the
picture quality registered in the picture profile as
follows:
1 Press the PICTURE PROFILE button.
The P.PROFILE menu is displayed.
2 Operating the jog dial, select “SEL”
then the desired picture profile from the
list.
The camcorder is adjusted to the picture
quality specified by the selected Profile.
(If you select “OFF,” the camcorder will be
fixed at the standard picture quality, and no
picture adjustment is allowed.)
3 Press the PICTURE PROFILE button
to exit the menu.
The picture profile being selected is displayed
when you press the DISPLAY/BATT INFO
button.
You can copy the settings of a selected picture
profile to another picture profile.
1 Select the source picture profile as
mentioned in “Selecting a Picture
Profile using the P. PROFILE menu”.
2 Select “Copy” from “SET” of the
P.PROFILE menu.
The picture profile numbers are listed on the
screen.
3 Specify the target picture profile.
“Execute” and “Cancel” are displayed.
4 Select “Execute.”
Copying begins.
When copying ends, the completion message is
displayed for three seconds, and the original
screen display is restored.
Selecting a Picture Profile
P
.
PROF
I
LE
SEL
SET
OFF
PP1:
STANDARD
PP2:
STANDARD
PP3:
STANDARD
PP4:
STANDARD
PP5:
STANDARD
PP6:
STANDARD
P
.
PROF
I
LE
PP
1:
STANDARD
Profile
Na
m
e
M
atrix
M
ulti
M
atrix
W
hite
HD Detail
SEL
SET
B
B
B
B
B
Copying the Settings of a Picture
Profile
Example:
P
.
PROF
I
LE
SEL
SET
OFF
PP1:
SceneA
PP2:
SceneB
PP3:
SceneC
PP4:
SceneD
PP5:
SceneE
PP6:
SceneF
TLCS
.
ATW 4300K
PP
1
++
T1.6
18dB
1 1.5 2 3 4 5 7