Filter
Top Products
Rec Review
57
Recording
To add or delete the OK mark to or from clips
before the last one
Use the Clip Operation menu on the thumbnail
screen.
See “Adding/Deleting the OK Mark to/from a Clip
(HD Mode Only)” on page 88.
You can review the last recorded clip on the
screen (Rec Review).
Press the REC REVIEW button after
recording is finished.
You can assign the Rec Review function to an
assignable button to use it instead (page 58).
Playback of the specified block of the clip begins.
In Rec Review, the last 3 seconds, 10 seconds, or
the entire part of the clip is displayed, depending
on the Rec Review setting (page 105) of the
CAMERA SET menu. It is set to 3 seconds at the
factory.
Rec Review is terminated at the end of the clip,
resuming STBY (recording standby) status.
To interrupt Rec Review
Press the REC REVIEW or STOP button or the
assignable button to which you assigned the Rec
Review function.
Rec Review is canceled, resuming STBY
(recording standby) status.
Notes
• If the duration of the last recorded clip is less
than the time (3 or 10 seconds) specified for Rec
Review, the clip is played back from the
beginning to the end.
Rec Review
REC REVIEW
EXPANDED
FOCUS
P
L
A
Y
/
P
A
U
S
E
F
F
W
D
REC REVIEW
button