Filter
Top Products
Clip Operations
92
Playback
The items other than the following are the same as
those on the EXPAND CLIP screen:
1.Timecode indication
The timecode of the frame at the cursor on the
SHOT MARK screen is displayed.
Clip Operation menu on the SHOT MARK
screen
When you select a frame on the SHOT MARK
screen and press the jog dial, the Clip Operation
menu pops up to permit you further operations.
In HD mode, you can add shot marks to the clips
after recording or delete the recorded shot marks.
Adding a shot mark on the EXPAND CLIP
screen
1 Select the frame to which you wish to
add a shot mark on the EXPAND CLIP
screen then press the jog dial.
The Clip Operation menu pops up.
2 Select “SHOT MARK1 ADD” or
“SHOT MARK2 ADD” from the Clip
Operation menu.
The information screen for the selected frame
appears, and a confirmation message is
displayed below the image.
3 Select “Execute.”
Deleting a shot mark
You can delete shot marks on the EXPAND CLIP
screen (page 90) or on the SHOT MARK screen
(page 91).
1 Select a frame from which you wish to
delete the shot mark on the EXPAND
CLIP screen or the SHOT MARK
screen then press the jog dial.
The Clip Operation menu pops up.
2 Select the “SHOT MARK1 DEL” or
“SHOT MARK2 DEL” from the Clip
Operation menu.
The information screen for the selected frame
appears and a confirmation message is
displayed below the image.
3 Select “Execute.”
In HD mode, you can change the index frame of a
clip to another frame you selected on the
EXPAND CLIP screen (page 90) or the SHOT
MARK screen (page 91).
1 Select a frame to be the index frame on
the EXPAND CLIP screen or the SHOT
MARK screen then press the jog dial.
2 Select “SET INDEX PIC” from the Clip
Operation menu.
The information screen of the selected frame
appears and a confirmation message is
displayed below the image.
3 Select “Execute.”
Note
Even if you specify a frame other than the top
frame for the index frame, playback always
begins from the top frame when you start it from
the thumbnail screen.
Item Function
PAUSE To set to Pause mode at the selected
frame
SET INDEX PIC To specify the selected frame for the
index frame of the clip (page 92)
SHOT MARK1
DEL
To delete the shot mark 1 from the
selected frame (page 92)
SHOT MARK2
DEL
To delete the shot mark 2 from the
selected frame (page 92)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 93)
Adding/Deleting Shot Marks (HD
Mode Only)
Changing the Index Frame (HD
Mode Only)