Filter
Top Products
Displaying the Markers and Zebra Patterns
44
Recording
Displaying the guide frame lines
Set “Guide Frame” to “On” to insert the guide
frame lines into the screen area.
A zebra pattern(s) can be inserted to the picture
on the LCD monitor/viewfinder screen to check
the appropriate luminance level.
Turning the zebra-pattern indication on/
off
Pressing the ZEBRA button turns the zebra-
pattern indication on/off.
Changing the zebra pattern
Using “Zebra” of the LCD/VF SET menu, you
can change the zebra pattern to be displayed.
Press the MENU button to set the camcorder to
Menu mode, display the LCD/VF SET menu with
, and select “Zebra” from the menu.
Zebra Select
Select the zebra pattern(s) to be displayed.
1 (Zebra1): To display a zebra pattern in the area
of ±10% centering the video level set with
“Zebra1 Level.”
2 (Zebra2): To display a zebra pattern for the
video level over 100%.
Both: To display both Zebra1 and Zebra2.
Zebra1 Level
Set the center level of Zebra1 in the range of 50 to
107%. The default setting is 70%.
Displaying the Zebra Patterns
TCG 00:00:00:00 120min
STBY
Factory-set zebras
2 (100%)
1 (70%)
B
A
PRST
ZEBRA PEAKING
T
E
N
CE
ZEBRA button
00:00
LCD
VF
Peaking
M
arker
Zebra
Display
O
n/
O
ff
LCD/VF
SET
Zebra
Select
Zebra1
Level
:
1
:
70
B
B
B
B
B
B