Sony SNC-CS20 Security Camera User Manual


 
Operating the Camera
Administrator and User
16
Operating the Camera
The Operating the Camera section explains how to
monitor the image from the camera using your Web
browser. Use Internet Explorer as the Web browser.
The functions of the camera should be set by the
Administrator. For the setting of the camera, see
“Administrating the Camera” on page 28.
Administrator and User
This network camera identifies the people who log in as
the Administrator or User.
The Administrator can use all the functions of this
network camera including camera setting. The User can
use the functions for monitoring the image and audio
from the camera, and controlling the camera. The
Viewer mode setting is used to restrict the user's access
rights. There are five types of users.
Each type of user can use the corresponding functions
below.
z Usable –Not usable
1) This function is usable with the Java applet viewer.
2) Available only when SolidPTZ is enabled on SNC-DM110 /
DM160 / CM120.
3) Available for SNC-DM160 / DS60 / CM120 / CS20.
4) Available for SNC-DM110 / DM160 / CM120.
The access rights of the administrator and the user can
be set in “Setting the User — User Menu” of the
Administrator menu on page 54.
Function Administrator
User
Full Pan/Tilt
4)
Preset
position
4)
Light View
Monitor a live image z zzzzz
View the date and time z zzzzz
Receive the audio z zzzzz
Control the image view size z zzzz
Zoom an image using the digital zoom z zzzz
Save a still image in the computer z zzzz
1)
Call the Preset position
2)
z zzz ––
Perform the pan/tilt/zoom operation
2)
zzz–––
Control the frame rate (Available in JPEG mode only) zz––––
Send an image file to the FTP server zz––––
Send an image attached to an e-mail zz––––
Record an image in the memory zz––––
Control the alarm output of the I/O port on the camera zz––––
Switch the Day/Night function mode
3)
zz––––
Play an audio file (Voice alert) zz––––
Control the setting menu z –––––