Sony SNC-CS20 Security Camera User Manual


 
Administrating the Camera
Recording Images in Memory — Image memory Menu
67
Periodical recording Tab — Setting
the periodical recording mode
You can set to record the image file (JPEG file) in the
built-in memory periodically.
Display sample: SNC-DM160
Periodical recording
Select On when you want to use periodical recording.
Image file name
Type the file name of the image to be recorded to the
memory using up to 10 alphanumeric characters, -
(hyphen) and _ (under score).
The actual image file name will be the specified image
file name with the a suffix and the extension .jpg.
Note
You cannot record the audio file using the periodical
recording function.
Suffix
Select a suffix to be added to the file name.
None: The recording file name will be the image file
name.
Date & time: The date & time suffix is added to the
image file name.
The date/time suffix consists of lower two-digits of
the year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits),
and consecutive number (2 digits), thus adding a 14-
digit number to the image file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two
fixed digits 00 are added to the image file name.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Mode (SNC-DM110 / DM160 / CM120 only)
Select the periodical recording mode.
Periodical mode: An image file is recorded periodically
according to the specified Interval and Effective
period.
Tour mode: An image file is recorded when the camera
is moved to each preset position during the tour.
Note
You cannot record files in Tour mode while PTZ on
motion detection is performed.
Interval
Type the interval at which you want to record an image
in the memory periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value
depending on the image size, image quality, bit rate, or
recording media.
Effective period
Set the period during which the periodical recording is
effective.
Always: The periodical recording is always effective.
Schedule: You can specify the period during which the
periodical recording is effective.
Click Schedule and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 73)
OK/Cancel
See “Buttons common to every menu” on page 28.
Folder structure of image memory
When the image memory function is used, the images
are recorded with the following tree structure of folder.
A represents a folder created automatically.
xxxxxxx.jpf
yyyyyyy.jpf
aaaaaaa.jpg
bbbbbbb.jpf
ccccccc.jpf
zzzzzzz.m4f
qqqqqqq.m4f
Root
Date_No.
Date_No.