Sony SNC-CS20 Security Camera User Manual


 
Others
Specifications
93
3) sysName=<string>
Set the case of “mib-2.system.sysName.0” in the
<string> position. The maximum length of
<string> is 255 characters.
4) enaAuthTraps=<value>
Set the case value of “mib-2.snmp.snmp
EnableAuthenTraps.0” in the <string> position.
Type “1” (enable) or “2” (disable) in the <value>
position.
5) community=<ID>,r,
<communityName>,<IpAddressString>
Set the community attributes. <ID> describes the
setting identification number (1 to 8)
<communityName> describes the community
name to be set, and <IpAddressString> describes
the IP address of the host you allow access (0.0.0.0
for any host).
Example: To allow reading by any host in the “private”
community and having the ID number “2”.
community=2,r,private,0.0.0.0
6) trap=<ID>,<communityName>,
<IpAddressString>
Set the attributes send traps to. <ID> describes the
setting identification number (1 to 8),
<communityName> describes the community
name to send traps to, and <IpAddressString>
describes the IP address of the host to send traps to.
Example: To specify the destination of traps as the
public community and the ID number “1”.
trap=1,public,192.168.0.101
7) delcommunity=<ID>
This parameter is used to delete the previous
community setting. <ID> describes the community
setting identification number (1 to 8).
8) deltrap=<ID>
This parameter is used to delete the previous setting
of the host to send traps to. <ID> describes the trap
setting identification number (1 to 8).
When you have finished changing the SNMP setting
information using the above parameters 1) to 8), check
the changed settings using an inquiry commands. If the
changed settings are OK, restart the SNMP using the
following CGI command.
SNMP restart command
<Method>
GET, POST
<Command>
Specifications
Network
Protocol
TCP/IP, ARP, ICMP, HTTP,
FTP(server/client), SMTP (client),
DHCP (client), DNS (client), NTP
(client), SNMP (MIB-2), RTP/
RTCP
Compression
Video compression format
JPEG/MPEG4
Audio compression format
G.711/G.726 (40, 32, 24, 16 kbps)
Image size SNC-DM110 / DM160 / CM120
JPEG only:
1280 × 960 (Quad-VGA)
960 × 720
768 × 576
JPEG / MPEG4:
640 × 480 (VGA)
384 × 288
320 × 240 (QVGA)
SNC-DS10 / DS60 / CS20
JPEG only:
768 × 576
JPEG / MPEG4:
640 × 480 (VGA)
384 × 288
320 × 240 (QVGA)
Maximum frame rate
30 fps
Maximum user access
10 users
Network security
Password (basic authentication)
IP filtering
Homepage customization
Homepage starts up in the built-in flash
memory.
Other functions
Motion detection
SolidPTZ (SNC-DM110 / DM160 /
CM120 only)
Light funnel (SNC-DM110 / DM160 /
CM120 only)