Sony SNC-CS20 Security Camera User Manual


 
Operating the Camera
Using the Trigger Button
26
Using the Trigger Button
You can operate various functions of the camera simply
by clicking (trigger) in the main viewer.
Sending a monitor image via e-mail
You can send a captured still image by attaching it to an
e-mail.
To use this function, you need to make e-Mail (SMTP)
active and set the address in the Trigger menu of the
Administrator menu properly (page 71).
1
Display the image on the monitor window.
2
Select e-Mail from the trigger drop-down list.
3
Click .
The still image of the moment you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
You can send a captured still image to the FTP server.
To use this function, you need to make FTP client active
and set the address in the Trigger menu of the
Administrator menu properly (page 71).
1
Display the image on the monitor window.
2
Select FTP from the trigger drop-down list.
3
Click .
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a camera image as a still
image
You can capture a camera image as a still picture and
record it in the built-in memory.
To use this function, you need to make Image memory
active and set the details in the Trigger menu of the
Administrator menu (page 71).
1
Display the image on the monitor window.
2
Select Image memory from the trigger drop-down
list.
3
Click .
The still image of the moment you click is captured,
and the image file is recorded.
Controlling alarm output 1, 2
You can control Alarm output 1, 2.
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger menu of the
Administrator menu (page 72).
1
Display the image on the monitor window.
2
Select Alarm output1 or Alarm output2 from the
trigger drop-down list.
3
Click .
The alarm output is switched by clicking.
The alarm output mode can be selected from
Toggle or Timer of Alarm output 1, 2 in the
Trigger menu (page 72).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
Controlling Day/Night function
(SNC-DM160 / DS60 / CM120 / CS20
only)
You can control the Day/Night function On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 72).
1
Display the image on the monitor window.