Sony SNC-CS20 Security Camera User Manual


 
Administrating the Camera
Setting the Operations from the Viewer — Trigger Menu
72
By selecting Image memory and clicking , a still
image of the moment you click is captured, and the
image file is recorded in the built-in memory.
When you click Image memory, the Trigger-Image
memory menu is displayed. You can set the necessary
options here. The setting options and setting procedures
are the same as those of the Image memory menu
(page 65).
Alarm output 1, 2
Checking this box allows you to select Alarm output 1
or Alarm output 2 from the trigger drop-down list in the
main viewer. You can control the alarm output by
selecting Alarm output 1 or Alarm output 2 and
clicking .
Select the alarm ouput control mode from Toggle or
Timer.
Toggle: Each time you click , On (short circuit) or
Off (open) is switched.
Timer: When you click , the alarm output is
switched to On (short circuit), and will automatically
switched to Off (open) after the time specified in
Duration has elapsed.
Duration
When Timer is selected, specify the time for which the
alarm output remains short circuited, from 1 to 300
seconds.
Day/Night (SNC-DM160 / DS60 / CM120 /
CS20 only)
Checking this box allows you to select Day/Night from
the trigger drop-down list in the main viewer. You can
control On (night mode) or Off (day mode) of the day/
night function by selecting Day/Night and clicking .
When you click the Day/Night button, the Trigger-Day/
Night menu is displayed. You can set the necessary
options here. The setting options and setting procedures
are the same as those in the Sense up tab of the Camera
menu (page 38).
Note
The day/night function is invalid when Day/Night mode
is set to Auto in the Trigger-Day/Night menu, even if
you click .
Voice alert 1, 2, 3
Checking this box allows you to select Voice alert 1,
Voice alert 2 or Voice alert 3 from the trigger drop-
down list in the main viewer. You can output audio from
the audio file saved in the camera by selecting Voice
alert 1 , 2 or 3 and clicking .
File
Displays the name of the audio file saved in the camera.
“Not uploaded” is displayed dimly if no audio file is
saved.
OK/Cancel
See “Buttons common to every menu” on page 28.