Filter
Top Products
Administrating the Camera
Using the 802.1X Authentication Function — 802.1X Menu
50
Wired interface status
Shows the authentication status of the 802.1X
authentication function for wired ports.
Click Refresh to update the status.
EAP identity
Type the user name to identify the client in the 802.1X
authentication server using 3 to 253 characters.
EAP method
Shows the authentication method used with the
authentication server. It is fixed as this camera supports
only the TLS method.
OK/Cancel
See “Buttons common to every menu” on page 28.
Client certificate Tab
You can import a client certificate to the camera or
export a certificate request.
Client certificate
Import, display or delete the client certificate.
To import the client certificate
Click Browse… to select the client certificate to be
imported.
Then click Submit, and the selected file will be
imported to the camera.
Note
The import process becomes invalid if the selected file is
not a client certificate or the imported client certificate is
not allowed.
To display the information of the client
certificate
When the client certificate has been saved in the camera
correctly, its information appears on Status, Issuer DN,
Subject DN, Validity Period and Extended Key
Usage.
Status: Shows if the status of the client certificate is
valid or invalid.
Valid means the client certificate is correctly stored
and set.
Invalid means the client certificate is not correctly
stored and set.
Possible causes of Invalid are the following:
– When the private key password included in the
client certificate is not specified correctly
– When the private key password is specified in spite
of the fact that the key pair in the client certificate
is not encrypted.
– When the key pair is not included in the client
certificate.
Note
When the client certificate to be imported is of
PKCS#12 format and the private key password is not set
correctly, “<Put correct private key password>” is
displayed in the boxes of Issuer DN, Subject DN,
Validity Period and Extended Key Usage. Specify the
correct private key password to confirm the information
of the certificate.
To delete the client certificate
Click Delete, and the client certificate stored in the
camera will be deleted.
Private key password
Type the password for the private key information
included in the client certificate using up to 50
characters.
Leave the text box blank if the private key information
included in the client certificate is not encrypted.
If no private key password is set in the camera, the text
box is active to allow entering of a password.
If a private key password is already set, it is displayed
with turned letters.
Reset
To change the private key password, click this button.
The current password is cleared and the password text
box is active to allow a new password entry.
Note
Click at the bottom of the menu if you want
to cancel changing the private key password after
clicking Reset. Doing so restores the other setting items
in the Client certificate tab to the previous settings.