Sony SNC-CS20 Security Camera User Manual


 
Administrating the Camera
Basic Operations of Administrator Menu
29
Click this button to invalidate the set values and return to
the previous settings.
General notes on menus
After changing a setting on a menu, wait at least 10
seconds before turning off the power of the camera.
If the power is turned off immediately, the changed
setting may not be stored correctly.
When the camera settings are changed while watching
the main viewer, some settings cannot be restored. To
reflect the change on the opening main viewer, click
Refresh of the web browser.
Configuration of Administrator menu
Display sample: SNC-DM160
System
Displays the System menu. (“Configuring the System —
System Menu” on page 30)
Camera
Displays the Camera menu for setting the camera image
and audio. (“Setting the Camera Image and Audio —
Camera Menu” on page 35)
Network
Displays the Network menu for setting the network
connection. (“Configuring the Network — Network
Menu” on page 46)
802.1X
Displays the 802.1X menu for connecting the camera to
the network configured in compliance with the 802.1X
standard for port authentication. (“Using the 802.1X
Authentication Function — 802.1X Menu” on page 49)
User
Displays the User menu for setting the log in user name
and password. (“Setting the User — User Menu” on
page 54)
Security
Displays the Security menu for specifying a computer
that is allowed to connect to the camera. (“Setting the
Security — Security Menu” on page 55)
Preset position (SNC-DM110 / DM160 / CM120
only)
Displays the Preset position menu to register a position
you want to save.“Tour function”, which rotates the
registered positions, is also set here. (“Saving the
SolidPTZ Display Area and Action — Preset position
Menu (SNC-DM110 / DM160 / CM120 only)” on page
56)
e-Mail (SMTP)
Displays the e-Mail (SMTP) menu for sending an e-
mail. (“Sending an Image via E-mail — e-Mail (SMTP)
Menu” on page 59)
FTP client
Displays the FTP client menu for sending an image/
audio file, etc. to an FTP server. (“Sending Images to
FTP Server — FTP client Menu” on page 62)
Image memory
Displays the Image memory menu for recording an
image/audio file, etc. in the built-in memory.
(“Recording Images in Memory — Image memory
Menu” on page 65)
FTP server
Displays the FTP server menu for setting the FTP server
function of the camera. (“Downloading Images from the
Camera — FTP server Menu” on page 68)
Alarm output
Displays the Alarm output menu for setting the alarm
out terminal of the camera. (“Setting the Alarm Output
— Alarm output Menu” on page 69)
Voice alert
Displays the Voice alert menu for playing the audio file
stored in the camera in synchronization with alarm
detection by the sensor input or the motion detection
function. (“Outputting Audio Linked to Alarm
Detection — Voice alert Menu” on page 70)
Trigger
Displays the Trigger menu for operations when you
click the trigger button in the main viewer. (“Setting the
Operations from the Viewer — Trigger Menu” on page
71)
Schedule
Displays the Schedule menu for the Sense up function,
Preset position function, e-Mail (SMTP) function, FTP