Filter
Top Products
Operating the Camera
Controlling the Monitor Image
11
Monitor Image Section
The image shot by the camera is shown here.
Controlling the Monitor
Image
You can control the monitor image from the image
control section on the main viewer page.
Image control section
Selecting the frame rate
Click the down-arrow button in the Frame rate box and
select the frame rate with which the images are
transmitted, from the drop-down list.
You can select the frame rate from among the following:
SNC-CS3N:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, Fastest
SNC-CS3P:
1, 2, 3, 4, 5, 6, 8, 12, 16, 20, Fastest
The numbers indicate “FPS” (the number of frames
transmitted per second).
With Fastest, the camera transmits the maximum
number of frames possible for the connected line. The
maximum frame rate is 30 FPS for the SNC-CS3N and
25 FPS for the SNC-CS3P.
Note
The frame rate options indicate the maximum number of
frames that can be transmitted. The number of frames
actually transmitted may vary depending on the network
environments and camera settings (image size and
image quality settings).
Selecting the view size
Click the down-arrow button in the View size box and
select the view size from the drop-down list.
You can select the view size from among the following:
Auto, 640 × 480, 320 × 240, 160 × 120
Auto is determined by the image size specified with
Image size on the Camera setting page (see page 20).