Others
Using the Supplied Setup Program
43
To specify the IP address manually:
Select Use the following IP address, and type the
IP address, Subnet mask and Default gateway in
each box.
8
Set the DNS server address.
To obtain the DNS server addresses
automatically:
Select Obtain DNS server address automatically.
To specify the DNS server addresses manually:
Select Use the following DNS server address, and
type the Primary DNS server address and
Secondary DNS server address in each box.
Note
The Third DNS server address and Fourth DNS
server address are invalid for this camera.
9
Set the HTTP port number.
Normally select 80 for the HTTP port number. To
use another port number, select the text box and
type a port number between 1024 and 65535.
10
Type the Administrator name and Administrator
password.
The default settings of both items are “admin.”
Note
You cannot change the Administrator name and
Administrator password in this step. To change
these items, See “Setting the User — User setting
Page” on page 25.
11
Confirm that all items are correctly set, then click
OK.
If “Setting OK” is displayed, the IP address is
correctly assigned.