Filter
Top Products
Operating the Camera
Logging in to Homepage — Welcome Page
16
With the ActiveX viewer
With the Java applet viewer
Control the camera from the main viewer.
Note
If the welcome page does not start correctly, the security
level of the Internet Explorer may be set to higher than
Medium. See “To display the welcome page and the
main viewer correctly” on page 12 and check the
security level.
Displaying the Administrator menu
directly
When the administrator sets the camera functions, the
Administrator menu can be opened directly from the
welcome page.
1
Select the viewer language on the welcome page.
Click English or Japanese at the bottom of the
welcome page.
2
Click Setting on the welcome page.
The following dialog appears.
3
Enter the user name and password for
Administrator, then click OK.
The user name “admin” and the password “admin”
are set at the factory for the Administrator. You can
change them using the User menu of the
Administrator menu (see page 40).
The Administrator menu appears.
About viewers
You can use the following viewers.
ActiveX viewer
This viewer can monitor the camera image in either the
JPEG or MPEG4 video codec.
You must install this viewer when you access the main
viewer for the first time.
When you display the main viewer of the
camera for the first time
When you log in the network camera using ActiveX
viewer for the first time (by clicking Enter to enter the
main viewer), the Security Warning appears. Click Ye s
and install ActiveX Control. You can use all the
functions of the viewer with ActiveX Control.