Filter
Top Products
Others
Specifications
76
Horizontal resolution
540 TV line (analog video)
Video S/N 50 dB
Minimum illumination
0.4 lx (F1.0)
AGC Auto/Manual (0-24 dB)
Shutter speed Auto/Manual
SNC-CS50N: 1/60-1/10000
SNC-CS50P: 1/50-1/10000
White balance ATW, ATW-PRO, One Push
Lens (standard wquipment)
Focal length 2.9 to 8.0 mm
F number F0.9 to F1.6
View angle Vertical 69° to 26°
Horizontal 94° to 35°
Minimum object distance
300 mm
Interface
Network port 10BASE-T/100BASE-TX (RJ-45)
I/O port Sensor input : × 2, make contact
Alarm output : × 2, 24 V AC/DC, 1 A
(mechanical relay outputs
electrically isolated from the
camera)
Serial interface RS-232C: ×1
Auto iris lens connector
DC servo
Video output VIDEO OUT: BNC, 1.0 Vp-p, 75
ohms, unbalanced, sync negative
PC card slot PCMCIA Type II
Microphone input
Minijack (monaural)
Plug-in-power supported (rated
voltage: 2.5 V DC)
Recommended load impedance 2.2
khoms
Line output Minijack (monaural), Maximum
output level: 1 Vrms
Others
Power supply 12 V DC ± 10%
24 V AC ± 10%, 50/60 Hz
PoE
Power consumption
9 W max.
Operating temperature
0 °C to +50 °C (32 °F to 122 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Operating humidity
20 to 80 %
Storage humidity
20 to 95 %
Dimensions (h/w/d)
Without supplied covers: 84 × 69 × 196
mm (3
3
/8 × 2
3
/4 × 7
3
/4 inches)
With supplied covers: 96.7 × 69 × 265
mm (3
7
/8 × 2
3
/4 × 10
1
/2 inches)
not including the projecting parts and
tripod adapter
Mass Without supplied covers:
Approx. 750 g (1 lb 11 oz)
With supplied covers:
Approx. 880 g (1 lb 15 oz)
Supplied accessories
CD-ROM (User’s Guide and supplied
programs) (1)
Fall-prevention wire rope (1)
Shoulder screw M4 (1)
Cable cover (1)
Front cover (1)
Lens cable cover (1)
Front cover screw (1)
Installation Manual (1)
B&P Warranty Booklet (1)
(SNC-CS50N only)
Optional accessories
“Memory Stick”MSX-2GN (2GB)
MSX-1GS (1GB)
MSX-512S (512MB)
MSH-128 (128MB)
“Memory Stick”PC card adapter
MSAC-PC4
Wireless card SNCA-CFW1
Wireless LAN antenna
SNCA-AN1
Design and specifications are subject to change without
notice.
Regular parts replacement
Some of the parts that make up this product
(electrolytic condenser, for example) need replacing
regularly depending on their life expectancies.
The lives of parts differ according to the environment or
condition in which this product is used and the length
of time it is used, so we recommend regular checks.
Consult the dealer from whom you bought it for details.