Filter
Top Products
Administrating the Camera
Setting the Camera Image and Audio — Camera Menu
35
Streaming Tab
Use this tab to set the items for the transmission by UDP
or multicast.
Unicast streaming
Specify the transmission port numbers of the video data
and audio data to be used when UDP (Unicast) is
selected with in the main viewer.
Video port number
Specify the transmission port number of the MPEG4
video data. It is initially set to 50000. Specify an even
number from 1024 to 65534. Two port numbers (the
number specified here and an odd number with 1 added
to the specified number) are actually used for video data
communication and control.
Audio port number
Specify the transmission port number of the audio data.
It is initially set to 50002. Specify an even number from
1024 to 65534. Two port numbers (the number specified
here and an odd number with 1 added to the specified
number) are actually used for audio data communication
and control.
Note
Specify different numbers for the video port number and
the audio port number.
Multicast streaming
Set whether the camera uses multicast streaming for
MPEG4 images or not. It reduces the transmission load
on the camera by making the computer of the same
segment network receive the same transmitting data.
Select On to allow and Off not to allow multicast
sending.
When you select On, set Multicast address, Video port
number and Audio port number properly.
Multicast address
Type the multicast address used on the Multicast
streaming.
Video port number
Specify the MPEG4 video transmission port number
used for the Multicast streaming. It is initially set to
60000. Specify an even number from 1024 to 65534.
Two port numbers (the number specified here and an
odd number with 1 added to the specified number) are
actually used for video data communication and control.
Audio port number
Specify the audio transmission port number used for the
Multicast streaming. It is initially set to 60002. Specify
an even number from 1024 to 65534. Two port numbers
(the number specified here and an odd number with 1
added to the specified number) are actually used for
audio data communication and control.
Note
Specify different numbers for the video port number and
the audio port number.
OK/Cancel
See “Buttons common to every menu” on page 26.