Filter
Top Products
Administrating the Camera
Downloading Images from the Camera — FTP server Menu / Setting the Alarm Output — Alarm output Menu
51
Downloading Images
from the Camera
— FTP
server Menu
When you click FTP server in the Administrator menu,
the FTP server menu appears. Use this menu to set up for
the FTP server function that finds a specified image and
audio file stored in an ATA memory card (not supplied)
or downloads a file from the camera.
FTP server function
To activate the FTP server function, select On.
ATA memory card
The current memory space of the ATA memory card
inserted into the PC card slot of the camera is displayed
on the right.
OK/Cancel
See “Buttons common to every menu” on page 26.
Note
The frame rate and operability on the main viewer may
be reduced when you logged in to the FTP server of this
unit using the FTP client software installed in the
computer.
Setting the Alarm Output
— Alarm output Menu
When you click Alarm output in the Administrator
menu, the Alarm output menu appears.
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the camera
linked to the alarm detection, the timer and the Day/
Night function.
The Alarm output menu consists of two tabs: Alarm
out 1 and Alarm out 2.
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
Alarm out 1, 2 Tab
Alarm output
To activate the alarm output function, select On.
Mode
Select the mode of the alarm output function.
Alarm: Controls alarm output by synchronizing it with
an external sensor input or the built-in object
detection function.
When Alarm is selected, the items Sensor input 1,
Sensor input 2, Object detection, Alarm duration
and Effective period become active.
Timer: Controls alarm output using the timer.
Click Schedule and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 55)
Day/Night: Controls the alarm output linked to the day/
night function.