Filter
Top Products
Operating the Camera
Controlling Day/Night Function / Playing the Audio File Stored in the Camera
23
Controlling Day/Night
Function
You can control the Day/Night function On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 54).
1
Display the image on the monitor window.
2
Select Day/Night from the trigger drop-down list.
3
Click .
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night mode in the Trigger-Day/Night menu
(page 54) is set to Disable or Auto, you cannot control
the Day/Night function by clicking .
Playing the Audio File
Stored in the Camera
You can play the audio file stored in the camera using the
SNC audio upload tool.
To use this function, you need to make Voice alert
active in the Trigger menu of the Administrator menu
(page 55).
1
Display the image on the monitor window.
2
Select Voice alert from the trigger drop-down list.
3
Click .
Playback of the audio file starts and the playback
sound is output from the speaker connected to the
camera.