Filter
Top Products
Operating the Camera
Controlling the Application Manually
13
control section. The three buttons appear and the
FOCUS button name changes to PRESET.
Moving the Camera to the Preset
Position
When you click this button, the PRESET list box
appears.
The PRESET button name changes to FOCUS.
PRESET list box
Click the down-arrow button and select the preset
position name from the drop-down list. Then, the
camera will move to the preset position that you have
stored in memory using the Preset position setting page
(see page 25).
Controlling the
Application Manually
You can send an image or output a trigger to control the
alarm output, using the image control section on the
main viewer page.
For this function, user access right Level 3 or Level 4 is
required (see page 23).
Click Trigger on the menu section to display the
trigger control parts.
Image control section (trigger control parts)
Sending a Still Image File to an FTP
Server
If you select FTP send and click , the current still
image is captured and the captured image file is sent to
the FTP server specified on the FTP client setting page.
To use this function, you need to select the Use FTP
client function option and the Manual mode on the
FTP client setting page.
For details, see “Sending Images to FTP Server — FTP
client setting Page” on page 28.
Note
If the camera is installed on a desk top, the sent still
image is upside down.
Sending a Still Image via E-mail
If you select Mail send and click , the current still
image is captured and an E-mail with the captured image
file attached is sent to the E-mail address(es) specified
on the SMTP setting page.
To use this function, you need to select the Use SMTP
function option and the Manual mode on the SMTP
setting page.
For details, see “Sending an Image via E-mail — SMTP
setting Page” on page 32.