Filter
Top Products
Administrating the Camera
Recording Images in Memory — Image memory setting Page
36
Memory
Select the memory you want to store the image to, from
the drop-down list.
Built-in memory: Built-in memory of the camera
(about 8 MB)
ATA memory card (A-slot): ATA memory card
inserted into A slot of the camera
ATA memory card (B-slot): ATA memory card
inserted into B slot of the camera
Notes
• The image recorded in the built-in memory will be
erased when the power of the camera is turned off.
• The frame rate and operability on the main viewer
page may decrease during image storage.
Recording an Image in the Selected
Memory — Image memory setting
Page
Image file name
Type the basic file name you want to assign to the
images when saving in the memory. You can use up to
6 alphanumeric, - (hyphen) and _ (underscore) for
naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be recorded in memory.
Date/Time: The date/time suffix is added to the file
name.
The date/timer suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits) and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Tip
When the Mode menu is set to Alarm, the type of alarm
and the capture timing to the alarm are added to the
suffix.
Type of alarm: S1 (Sensor 1), S2 (Sensor 2), S3 (Sensor
3), AD (Activity Detection)
Capture timing: PR (Pre-alarm), JT (Just alarm), PT
(Post-alarm)
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Overwrite
Select if you overwrite the file or not when there is
insufficient memory space to record the image.
Select On to allow overwriting. The oldest file or folder
is overwritten first.
Select Off to prohibit overwriting. In this case, a new
file cannot be stored.
Mode
Select the mode of the Image memory function.
Manual: Records a still image in the selected memory
manually.
In this mode, when you click the (Trigger) button
on the main viewer page, a still image is captured and
recorded in the selected memory. (See “Controlling
the Application Manually” on page 13.)
Alarm: Records a still image in the selected memory by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 36).
Note
If the Suffix menu is set to None, you cannot select
the Alarm mode. When you want to use the Alarm
mode, set the Suffix menu to Date/Time or
Sequence number.
Periodical recording:Records still images in the
selected memory periodically. When you select
Periodical recording, the Periodical recording
mode setting section appears (see page 37).
Alarm mode setting Section