Filter
Top Products
Administrating the Camera
Setting the Camera — Camera setting Page
20
4
Click on the still image to specify the trimming
portion.
A red frame that appears when you clicked
indicates the trimming portion.
The trimming portion is determined as shown
below:
To change the trimming portion, click on another
point on the image.
5
Click OK at the bottom of the window.
The trimmed image is displayed on the main viewer
page.
6
To close the image, click on the upper-right
corner.
Zoom mode
Select the zoom mode.
Select Full to operate the optical zoom of × 25 and the
electronic zoom of × 12, giving × 300 in total. The
electronic zoom will operate after the optical zoom.
Select Optical only to operate the optical zoom of × 25
only. In this case, you can use an electronic zoom of × 2
by clicking the DZOOM x 2 button on the main viewer
page. To cancel the electronic zoom, click the DZOOM
x 1 button. (See “Zooming” on page 12.)
Focus mode
Select the focus mode.
Select Auto to adjust the focus automatically.
Select Manual to adjust the focus manually using the
NEAR and FAR buttons on the main viewer page. If you
click the ONE PUSH AF button, the focus is adjusted
instantly. (See “Focusing” on page 12.)
White balance mode
Select the white balance mode.
You can select from among Auto, Indoor, Outdoor,
One push WB, ATW and Manual.
If you select One push WB, the ONE PUSH
TRIGGER button is displayed. Click the button to
adjust the white balance instantly.
If you select Manual, the R Gain and B Gain controls
are displayed. Set 0 to 255 for each control.
Lower Half of Camera setting Page
Exposure mode
Select the exposure from among Full auto, Shutter
priority, Iris priority and Manual.
The setting items required for each setting appear.
Full auto: Adjusts the exposure automatically using the
electronic shutter, iris and gain. Select the Back light
compensation menu On or Off.
Shutter priority: Adjusts the exposure automatically
using the iris and gain. Select the electronic shutter
speed from the Shutter drop-down list.
Iris priority: Adjusts the exposure automatically using
the electronic shutter and gain. For the iris
adjustment, select the F number from the Iris drop-
down list.
Manual: Select the electronic shutter, iris and gain from
the drop-down list for each control.
Back light compensation
Select On to activate the backlight compensation, or Off
to deactivate it.
Point rotated by 180° around the
axis of the center of the still image
Still image
Red trimming
frame
Center of the
still image
Clicked point