Filter
Top Products
Administrating the Camera
Sending an Image via E-mail — SMTP setting Page
32
Sending an Image via E-
mail
— SMTP setting Page
When you click SMTP on the Administrator menu, the
SMTP setting page appears.
Use this page to set up for the SMTP function that can
capture and send a still image attached to an E-mail. You
can capture a still image at the moment when a trigger
occurs by an external sensor input, the built-in activity
detection function or a manual trigger button. The
captured still image is sent as an atttachment of the E-
mail. You can also send a still image periodically.
Activating/Deactivating the SMTP
Function — SMTP usage setting
Page
To activate the SMTP function, select Use SMTP
function and click OK. The SMTP setting page
appears.
When you do not use the SMTP function, select Do not
use SMTP function and click OK.
Note
The frame rate and operability on the main viewer page
may decrease while an image file is being transmitted
via an E-mail.
Setting the SMTP Function
— SMTP setting Page
SMTP server name
Type the SMTP server name up to 64 characters, or the
IP address of the SMTP server.
Recipient e-mail address
Type the recipient E-mail address up to 64 characters.
You can specify up to three recipient e-mail addresses.
Administrator e-mail address
Type the Administrator e-mail address up to 64
characters.
This address is used for reply mail and sending error
messages from the camera.
Subject
Type the subject/title of the E-mail up to 64 characters.
Message
Type the text of the E-mail up to 384 characters. (A line
break is equivalent to 2 characters.)
Image file name
Type the basic file name you want to assign to the image
to attach an E-mail. You can use up to 6 alphanumeric,
- (hyphen) and _ (underscore) for naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be sent via an E-mail.
Date/Time: The date/time suffix is added to the file
name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits) ,
thus 12-digit number is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the SMTP function.
Manual: Sends a still image attached to an E-mail
manually. After selecting Manual, click OK. The
SMTP function mode is set to Manual.
In this mode, when you click the (Trigger)
button on the main viewer page, a still image is