Filter
Top Products
Administrating the Camera
Showing the Pop-up — Pop-up setting Page
41
3
Hold down the mouse left button and drag it
diagonally.
The portion marked with a red frame determines the
activity detection working area.
As the default setting, the whole area is set as the
activity detection working area.
Showing the Pop-up
— Pop-up setting Page
When you click Pop-up on the Administrator menu, the
Pop-up setting page appears.
Use this page to set up for displaying a pop-up with your
favorite message on the computer screen. You can
display the pop-up on all the computers monitoring the
camera image by the Administrator's manual operation.
The pop-up can also be displayed on the computer
logged in as the Administrator when there is an alarm
input.
Manual pop-up text
Type the text to be displayed on a pop-up between 1 and
64 characters.
Click Apply to display the pop-up on all the computers
monitoring the camera.
Alarm pop-up text
Sensor 1/Sensor 2/Sensor 3/Activity detection
Set a pop-up to be displayed when an alarm is input.
This pop-up is only displayed on the computer
monitoring the camera as the Administrator.
Select On to show a pop-up when an alarm occurs by the
corresponding sensor. Select Off not to show it.
On each text box, type the text to be displayed on the
pop-up between 1 and 64 characters.
OK/Cancel
See “Buttons common to every setting page” on page
16.